iBiotec
NEOLUBE® AL 500
  |
 |
 |
|
Extreme-pressure grease
With anti-oxidation and anti-corrosive additive
Heavy loads
Low and high speeds
Very low temperatures
Excellent water and steam resistance
AREAS OF USE
The NEOLUBE AL 500 grease has been developed to meet the extreme load conditions in the food industry, including freezing and deep-freezing.
Bearings, joints.
Power transmissions, roller chains, long pitch chains, API-type chains, hollow rivet chains, leaf chains, slat band chains, fixed ratio transmissions, gears.
Toothed wheel transmissions, meshing wheel transmissions, cylindrical gear transmissions, worm gear transmissions.
Information transmission, cams, pushbuttons.
Guides, columns, slides.
Pumps, valves, ball or gate valves.
Percolators, water heaters, meters, time and date stamping equipment, measuring equipment, marine equipment, radio navigation equipment, agitators, mixers, crushers, presses, centrifuges, sterilizers, packaging machines, agricultural equipment, wrapping machines, bottle capping machines, shrinkwrappers, press tools.
All types of clean lubrication without risk of pollution.
Installation of seals.
Canning plants, bakeries, confectionery plants, biscuit plants, sweet factories,
Delicatessens, cheese dairies, slaughterhouses, animal feed,
Industrial ice-cream plants, breweries, mineral water production,
Wineries and wineries,
Shippers of fruits and vegetables.
TYPICAL PHYSICAL AND CHEMICAL PROPERTIES
|
PHYSICAL PROPERTIES OF THE GREASE |
|||
|
PROPERTIES |
STANDARD or METHOD |
VALUE |
UNIT |
|
Appearance |
Visual |
Smooth, thick |
nm |
|
Colour |
Visual |
White |
nm |
|
Bulk density at 25°C (Pycnometer) |
NF T 30,020 |
940 |
Kg/m³ |
|
NLGI class 2 Not worked Worked, 60 strokes Worked, 100,000 strokes |
NLGI National Lubricating Grease Institute |
265-295 265-295 295-325 |
Classification according to penetrability |
|
Soap |
- |
Calcium |
- |
|
Nature of solid lubricants |
- |
0 |
% |
|
Drop point |
NF ISO 2176 / ASTM D 566 |
>150 |
°C |
|
Impurities < 25 ppm > 75 ppm > 125 ppm |
FMTS 791 3005 |
0.0 0 0 |
nb/ml |
|
PHYSICAL AND CHEMICAL PROPERTIES OF THE BASE OIL |
|||
|
PROPERTIES |
STANDARD or METHOD |
VALUE |
UNIT |
|
Nature of the base oil |
- |
ester |
- |
|
Kinematic viscosity at 40°C Kinematic viscosity at 100°C |
NF EN ISO 3104 |
210 25 |
mm2/s mm2/s |
|
Acid value la |
NF ISO 6618 |
0.01 |
mg KOH/l |
|
PERFORMANCE CHARACTERISTICS |
|||
|
PROPERTIES |
STANDARD or METHOD |
VALUE |
UNIT |
|
Oil separation 7 days at 40°C (penetrant testing) |
NF T 60 191 |
0.01 |
mass % |
|
Oil separation 24H at 41kPa (pressure penetrant testing) |
ASTM D 1742 |
0.2 |
mass % |
|
Sulphated ash |
NF T 60 144 |
0.00 |
mass % |
|
Copper blade corrosion |
ASTM D 4048 |
1 b |
Rating |
|
Hoffman oxidation |
ASTM D 942 |
4 |
psi |
|
22h at 121°C evaporation loss |
ASTM D 972 |
<3 |
mass % |
|
Noack evaporation loss |
NF T 60 101 CEC L-40 A-93 ASTM D5800 |
<1 |
mass % |
|
Swelling on elastomers 70h at 100°C |
ASTM D 4289.83 |
<3 |
Dimensional % variation |
|
Temperature ranges Continuous Peak |
- - |
-40°C +120°C -40°C +130°C |
°C °C |
|
Rotation factor |
n.dm |
300,000 |
mm.min-1 |
|
4-ball test Indentation diameter Weld load index |
ASTM D 2266 / ISO 20 623 |
0.65 3150 N (450 kgF) |
mm N |
|
TIMKEN Test |
ASTM D 2509 |
30 |
Ibs |
|
EMCOR rust prevention test |
NFT 60,135 |
0 |
Rating |
PRESENTATION
Cartridge
430 ml
.jpg)
Looking for another product?
|
Discover our entire IAA range by clicking on the photo |
Manufacturing, lubrification, cleansing, protection,
IBiotec® Tec Industries® Service
offers a wide range of products reserved for industrial area
If you wish for :
a free sample
a technical advice
a product data sheet
a safety data sheet
IBiotec® Tec Industries®Service
manufacturer of technical chemical products.
Welcome to our website.
IBiotec® Tec Industries®Service is on : 